What To Know
- If your juicer is heavily soiled, you can soak the removable parts in a solution of warm water and white vinegar for 30 minutes before cleaning.
- Wipe down the exterior of the juicer with a damp cloth to remove any spills or residue.
- Yes, you can soak the removable parts in a solution of equal parts water and white vinegar for 30 minutes to remove stains or odors.
Maintaining the cleanliness of your Kuving Whole Slow Juicer is crucial for ensuring its optimal performance and longevity. Follow these comprehensive instructions to effortlessly clean your juicer and keep it in pristine condition.
Disassembling the Juicer
1. Unplug the juicer: Before handling any components, disconnect it from the power source.
2. Remove the hopper: Lift the top cover and remove the hopper by pulling it upward.
3. Detach the auger: Unscrew the auger knob and lift the auger out of the juicing chamber.
4. Separate the strainer and drum: Pull the strainer and drum assembly out of the juicing chamber.
5. Remove the pulp collector: Take out the pulp collector from the bottom of the juicer.
Cleaning the Components
1. Hopper and Auger
- Use a soft brush or a clean cloth to wipe away any pulp residue.
- Rinse with warm water and mild dish soap.
2. Strainer and Drum
- Use a soft brush to remove any pulp or fibers stuck in the strainer holes.
- Rinse with warm water and mild dish soap.
- Soak in a solution of equal parts water and white vinegar for 30 minutes to remove stains or odors.
3. Juicing Chamber
- Use a damp cloth to wipe away any remaining pulp or juice.
- Rinse with warm water and mild dish soap.
- If necessary, use a soft brush to clean hard-to-reach areas.
4. Pulp Collector
- Empty the pulp collector and rinse with warm water.
- Use a soft brush to remove any remaining pulp.
Reassembling the Juicer
1. Insert the strainer and drum: Place the strainer and drum assembly back into the juicing chamber.
2. Attach the auger: Insert the auger into the juicing chamber and screw on the auger knob.
3. Place the hopper: Align the hopper with the juicing chamber and push it down until it clicks into place.
4. Connect the power cord: Plug the juicer back into the power outlet.
Additional Cleaning Tips
- Clean your juicer after each use to prevent pulp buildup and bacteria growth.
- Use a soft brush or sponge to avoid scratching the components.
- Avoid using harsh chemicals or abrasive cleaners.
- If your juicer is heavily soiled, you can soak the removable parts in a solution of warm water and white vinegar for 30 minutes before cleaning.
- Allow all components to dry completely before reassembling the juicer.
Regular Maintenance
- Lubricate the auger: Apply a few drops of food-grade lubricant to the auger shaft every 3-6 months.
- Inspect the seals: Check the rubber seals regularly for any signs of wear or damage. Replace them if necessary.
- Clean the exterior: Wipe down the exterior of the juicer with a damp cloth to remove any spills or residue.
Wrapping Up
By following these simple steps, you can effortlessly clean and maintain your Kuving Whole Slow Juicer. Regular cleaning and maintenance will ensure that your juicer delivers optimal performance and lasts for many years to come.
Information You Need to Know
Q: How often should I clean my Kuving slow juicer?
A: Clean your juicer after each use to prevent pulp buildup and bacteria growth.
Q: What type of brush should I use to clean the strainer?
A: Use a soft brush with soft bristles to avoid damaging the strainer holes.
Q: Can I use vinegar to clean my juicer?
A: Yes, you can soak the removable parts in a solution of equal parts water and white vinegar for 30 minutes to remove stains or odors.
Q: How do I lubricate the auger?
A: Apply a few drops of food-grade lubricant to the auger shaft every 3-6 months.
Q: Where can I find replacement parts for my Kuving juicer?
A: You can find replacement parts on the official Kuving website or authorized retailers.
