What To Know
- If you notice any discoloration or scratches on the cup, use a baking soda paste to gently scrub away the stains.
- Store your NutriBullet Juicer Pro in a clean and dry place when not in use.
- If food residue is stuck on the extractor blade or cup, soak them in warm soapy water for a longer period before scrubbing.
Maintaining a clean and hygienic NutriBullet Juicer Pro is crucial for ensuring optimal performance and preserving its longevity. This comprehensive guide will walk you through a step-by-step process on how to clean NutriBullet Juicer Pro effectively and effortlessly.
Disassembling Your NutriBullet Juicer Pro
1. Remove the Lid: Start by lifting the lid off the base.
2. Take Out the Extractor Blade: Carefully unscrew the extractor blade from the bottom of the cup.
3. Detach the Cup: Pull the cup straight up to separate it from the base.
4. Remove the Base: Turn the base upside down and detach the rubber gasket and the metal ring.
Cleaning the Components
1. Cup and Lid
- Fill the cup with warm water and add a few drops of dish soap.
- Shake vigorously to create a soapy solution.
- Rinse thoroughly with clean water.
2. Extractor Blade
- Soak the extractor blade in warm soapy water for 15 minutes.
- Use a soft brush to gently scrub away any food residue.
- Rinse thoroughly with clean water.
3. Base
- Wipe the base with a damp cloth to remove any dirt or debris.
- Do not immerse the base in water.
4. Rubber Gasket and Metal Ring
- Rinse the rubber gasket and metal ring with warm water.
- If necessary, use a soft brush to remove any stuck-on food particles.
Reassembling Your NutriBullet Juicer Pro
1. Insert the Metal Ring: Place the metal ring inside the base.
2. Attach the Rubber Gasket: Fit the rubber gasket over the metal ring.
3. Reattach the Cup: Align the cup with the base and push it down until it clicks into place.
4. Screw on the Extractor Blade: Tighten the extractor blade onto the bottom of the cup.
5. Replace the Lid: Place the lid on top of the cup and press down firmly.
Deep Cleaning Your NutriBullet Juicer Pro
1. Fill with Vinegar Solution: Fill the cup with a mixture of equal parts white vinegar and water.
2. Run for 30 Seconds: Turn on the juicer and let it run for 30 seconds.
3. Rinse Thoroughly: Rinse the cup and extractor blade with clean water.
4. Dry Completely: Allow all components to air dry completely before reassembling.
Additional Tips for Cleaning
- Clean your NutriBullet Juicer Pro after each use to prevent food residue from building up.
- Use a mild dish soap and avoid harsh chemicals that can damage the components.
- Do not place any components in the dishwasher.
- If you notice any discoloration or scratches on the cup, use a baking soda paste to gently scrub away the stains.
- Store your NutriBullet Juicer Pro in a clean and dry place when not in use.
Troubleshooting Common Cleaning Issues
- Stuck-on Food Residue: If food residue is stuck on the extractor blade or cup, soak them in warm soapy water for a longer period before scrubbing.
- Leaking Base: If the base is leaking, check if the rubber gasket is properly seated or if the metal ring is damaged. Replace the gasket or ring as needed.
- Discoloration: If the cup becomes discolored, use a baking soda paste to gently scrub away the stains.
Basics You Wanted To Know
Q: How often should I clean my NutriBullet Juicer Pro?
A: Clean your juicer after each use to prevent bacteria buildup and ensure optimal performance.
Q: Can I use bleach to clean my NutriBullet Juicer Pro?
A: No, do not use bleach or any harsh chemicals to clean your juicer as they can damage the components.
Q: How do I prevent my NutriBullet Juicer Pro from smelling?
A: Clean your juicer regularly and store it in a clean and dry place. If you notice an odor, deep clean your juicer with a vinegar solution.
