DIY Revolution: Effortlessly Convert Your Frigidaire Gas Range to Propane

Are you looking to switch your Frigidaire gas range from natural gas to propane? Converting your appliance can provide significant cost savings and energy efficiency. This comprehensive guide will walk you through the step-by-step process of converting your Frigidaire gas range to propane.

Understanding the Conversion Process

Converting your gas range involves replacing the natural gas orifices with propane orifices, adjusting the air-to-gas ratio, and installing a propane regulator. It’s crucial to note that this conversion should only be performed by a qualified technician or licensed gas fitter.

Safety Precautions

Before starting the conversion, ensure that the gas supply is turned off. Allow the range to cool completely to prevent burns. Wear protective gloves and eye gear throughout the process.

Tools and Materials Required

• Propane conversion kit (orifices, regulator)
• Adjustable wrench
• Screwdriver
• Pipe sealant
• Liquid dish soap or bubble solution

Step-by-Step Conversion Guide

1. Remove the Range Top

• Disconnect the gas line and electrical connections.
• Remove the screws securing the range top to the base.
• Carefully lift the range top and set it aside.

2. Locate the Orifices

• Inside the burner box, you’ll find the orifices.
• Remove the orifices using an adjustable wrench.

3. Install the Propane Orifices

• Apply pipe sealant to the threads of the propane orifices.
• Screw the propane orifices into place by hand.
• Tighten the orifices using an adjustable wrench, ensuring they are snug but not overtightened.

4. Adjust the Air-to-Gas Ratio

• Most Frigidaire gas ranges have an adjustable air shutter located near the burner.
• Use a screwdriver to adjust the shutter slightly.
• Turn the shutter clockwise to decrease airflow (richer mixture) or counterclockwise to increase airflow (leaner mixture).

5. Install the Propane Regulator

• Remove the existing natural gas regulator and install the propane regulator in its place.
• Tighten the regulator using an adjustable wrench.

6. Reinstall the Range Top

• Place the range top back on the base and secure it with the screws.
• Reconnect the gas line and electrical connections.

7. Test the Conversion

• Turn on the gas supply and ignite the burners.
• Observe the flames. They should be blue with a slight yellow tip.
• If the flames are yellow or orange, adjust the air shutter as needed.

Troubleshooting Tips

• Yellow or orange flames: Adjust the air shutter to allow more airflow.
• Sooting: Adjust the air shutter to allow less airflow.
• Gas leak: Check all connections for leaks using a liquid dish soap or bubble solution.

Summary: Ensuring a Smooth Transition

Converting your Frigidaire gas range to propane can provide significant benefits. By following this comprehensive guide and working with a qualified technician, you can ensure a smooth and safe conversion process. Enjoy the cost savings and energy efficiency of propane with your newly converted gas range.

Frequently Asked Questions

Q: Can I convert my Frigidaire gas range to propane myself?

A: It’s highly recommended to have a qualified technician perform the conversion to ensure safety and proper operation.

Q: What is the cost of converting a gas range to propane?

A: The cost can vary depending on the conversion kit and labor costs, but it typically ranges from $100 to $300.

Q: Will converting my range void the warranty?

A: Converting the range to propane may void the original warranty. It’s best to check with the manufacturer before proceeding.

Q: What are the advantages of converting to propane?

A: Propane offers cost savings, energy efficiency, and reduced carbon emissions compared to natural gas.

Q: How often should I have my converted range inspected?

A: It’s recommended to have your converted range inspected annually by a qualified technician to ensure safe operation.