What To Know
- Align the natural gas burner with the mounting holes on the griddle.
- Connect the natural gas line to the inlet port on the burner.
- Connect the natural gas source to the inlet port on the burner.
Elevate your outdoor cooking experience by seamlessly converting your Blackstone griddle to natural gas. This transformative upgrade unlocks a world of convenience, efficiency, and enhanced grilling capabilities. Follow our step-by-step guide to empower your griddle with the clean-burning prowess of natural gas.
Materials Required
- Blackstone Natural Gas Conversion Kit
- Adjustable wrench
- Screwdriver
- Pipe sealant
- Propane tank (for purging purposes)
- Natural gas source
Safety First
- Ensure your griddle is disconnected from any propane source.
- Wear appropriate safety gear (gloves, eye protection).
- Work in a well-ventilated area.
Step 1: Remove the Propane Burner
- Locate the propane burner assembly under the griddle.
- Use an adjustable wrench to remove the bolts securing the burner.
- Carefully lift the burner assembly out of the griddle.
Step 2: Install the Natural Gas Burner
- Align the natural gas burner with the mounting holes on the griddle.
- Secure the burner using the bolts provided in the conversion kit.
- Tighten the bolts snugly, but avoid overtightening.
Step 3: Connect the Natural Gas Line
- Connect the natural gas line to the inlet port on the burner.
- Use pipe sealant to create a leak-proof connection.
- Tighten the connection using an adjustable wrench.
Step 4: Install the Igniter
- Remove the igniter from the propane burner assembly.
- Install the igniter into the designated location on the natural gas burner.
- Secure the igniter using the screws provided.
Step 5: Purge the Propane Tank
- Reconnect the propane tank to the griddle.
- Open the propane valve and ignite the burner.
- Let the burner burn for 1-2 minutes to purge any remaining propane from the system.
Step 6: Connect the Natural Gas Source
- Disconnect the propane tank.
- Connect the natural gas source to the inlet port on the burner.
- Open the natural gas valve and ignite the burner.
Step 7: Test the Griddle
- Adjust the heat settings to ensure the griddle reaches desired temperatures.
- Cook your favorite meals and enjoy the enhanced performance of your natural gas-powered Blackstone griddle.
Benefits of Converting to Natural Gas
- Convenience: No more hassle of refilling propane tanks.
- Cost-effectiveness: Natural gas is typically cheaper than propane.
- Efficiency: Natural gas burns cleaner and more efficiently, reducing fuel consumption.
- Enhanced Cooking: Precise temperature control and even heat distribution for optimal grilling results.
- Environmental Impact: Natural gas is a cleaner-burning fuel, reducing carbon emissions.
Questions You May Have
Q: Can I convert any Blackstone griddle to natural gas?
A: Most Blackstone griddle models can be converted to natural gas. Check the manufacturer’s instructions to confirm compatibility.
Q: Is it safe to convert my griddle to natural gas myself?
A: If you have basic plumbing and mechanical skills, you can safely perform the conversion following the steps outlined above. However, if you are unsure, it is recommended to consult a licensed gas technician.
Q: How much does it cost to convert my griddle to natural gas?
A: The conversion kit and materials typically cost between $50-$150. The cost of natural gas may vary depending on your location and usage.
Q: What are the advantages of using natural gas over propane?
A: Natural gas is more convenient, cost-effective, efficient, environmentally friendly, and provides enhanced cooking performance.
Q: How often should I clean my natural gas burner?
A: Inspect and clean the burner regularly, especially after heavy use, to prevent clogging and ensure optimal performance.
