What To Know
- Disassembling the juicer for cleaning or repair is a straightforward process that can be completed in a few simple steps.
- Use the Phillips head screwdriver to remove the screws that hold the filter basket in place.
- Use the Phillips head screwdriver to remove the screws that hold the juicing chamber in place.
Maintaining your Nama juicer is essential for optimal performance and longevity. Disassembling the juicer for cleaning or repair is a straightforward process that can be completed in a few simple steps. This comprehensive guide will provide you with detailed instructions on how to disassemble your Nama juicer, ensuring a hassle-free experience.
Step 1: Gather Necessary Tools
Before you begin, gather the following tools:
- Phillips head screwdriver
- Flathead screwdriver
- Wrench
- Cleaning cloths
Step 2: Unplug the Juicer
For safety reasons, always unplug the juicer from the power outlet before disassembling.
Step 3: Remove the Pulp Chamber
Locate the pulp chamber at the bottom of the juicer. Use the flathead screwdriver to gently pry open the latch and remove the pulp chamber.
Step 4: Remove the Auger
Use the wrench to loosen the nut that holds the auger in place. Once the nut is loose, carefully remove the auger by pulling it upwards.
Step 5: Remove the Filter Basket
Locate the filter basket inside the juicing chamber. Use the Phillips head screwdriver to remove the screws that hold the filter basket in place. Gently lift the filter basket out of the juicer.
Step 6: Remove the Juicing Chamber
Use the Phillips head screwdriver to remove the screws that hold the juicing chamber in place. Carefully lift the juicing chamber out of the base.
Step 7: Remove the Motor Base
Flip the juicer upside down. Use the Phillips head screwdriver to remove the screws that hold the motor base in place. Gently lift the motor base away from the base.
Step 8: Clean and Reassemble
Once the juicer is disassembled, use a damp cloth to clean all the components thoroughly. Allow the components to dry completely before reassembling. To reassemble, simply reverse the disassembly steps.
Tips for Reassembly
- Ensure that all the components are properly aligned before tightening the screws.
- Tighten the screws securely, but avoid overtightening.
- Lubricate the auger with food-grade lubricant if necessary.
Troubleshooting
If you encounter any difficulties during disassembly or reassembly, refer to the following troubleshooting tips:
- If the auger is stuck, gently tap it with a rubber mallet to loosen it.
- If the filter basket is clogged, use a soft brush to remove any debris.
- If the motor base is not operating properly, contact Nama customer support.
Recommendations: The Rewards of Disassembly
Disassembling your Nama juicer is a simple and rewarding task that will help you maintain your juicer in optimal condition. By following these step-by-step instructions, you can ensure that your juicer will continue to provide you with fresh, nutritious juices for years to come.
Information You Need to Know
Q: How often should I disassemble my Nama juicer?
A: Disassemble your juicer every 3-6 months for cleaning and inspection.
Q: Can I use a dishwasher to clean the juicer components?
A: No, do not use a dishwasher to clean the juicer components. Hand washing is recommended.
Q: What should I do if I lose a screw during disassembly?
A: Contact Nama customer support for replacement screws.
