What To Know
- If installing the purifier on a countertop, ensure the surface is sturdy and can support the weight of the unit.
- Connect one end of the line to the water inlet port on the purifier and the other end to the water source (faucet or dedicated water line).
- Collect a sample of purified water and test it using a water quality test kit to ensure the purifier is functioning properly.
In today’s world, access to clean and safe drinking water is of paramount importance. With the Pureit water purifier, you can transform your tap water into pure, refreshing, and healthy drinking water. This comprehensive guide will provide you with step-by-step instructions on how to install your Pureit water purifier, ensuring that you and your loved ones enjoy the benefits of pure drinking water.
1. Gathering the Necessary Tools and Materials
Before embarking on the installation process, ensure you have the following tools and materials at hand:
- Pureit water purifier unit
- Installation kit (provided with the purifier)
- Electric drill (for drilling holes in the sink or countertop)
- Adjustable wrench
- Screwdriver
- Pliers
- Measuring tape
- Pencil or marker
- Safety goggles
- Gloves
2. Selecting the Ideal Installation Location
The installation location for your Pureit water purifier is crucial for its proper functioning and ease of use. Consider the following factors when choosing the installation site:
- Proximity to a water source: The purifier should be installed near a sink or countertop with easy access to a water supply.
- Sufficient space: Ensure there is adequate space around the installation area to allow for easy maintenance and filter changes.
- Accessibility: The purifier should be placed at a convenient height for easy access to the controls and filter replacement.
3. Preparing the Installation Site
Once you have selected the installation location, prepare the site by following these steps:
- Clean the surface where the purifier will be installed to ensure a secure and stable installation.
- Measure and mark the drilling locations for the mounting screws using a pencil or marker.
- If installing the purifier on a countertop, ensure the surface is sturdy and can support the weight of the unit.
4. Installing the Mounting Bracket
The mounting bracket serves as the foundation for your Pureit water purifier. To install it:
- Position the mounting bracket at the marked drilling locations.
- Use an electric drill to create pilot holes at the marked locations.
- Secure the mounting bracket to the surface using the provided screws and an adjustable wrench.
- Ensure the bracket is firmly attached and level.
5. Connecting the Water Supply Line
Now, it’s time to connect the water supply line to your Pureit water purifier:
- Locate the water supply line provided with the installation kit.
- Connect one end of the line to the water inlet port on the purifier and the other end to the water source (faucet or dedicated water line).
- Tighten the connections securely using an adjustable wrench or pliers.
- Turn on the water supply and check for any leaks.
6. Installing the Filter Cartridge
The filter cartridge is the heart of your Pureit water purifier, responsible for removing impurities and contaminants from the water. To install the filter cartridge:
- Open the filter housing by turning the filter cap counterclockwise.
- Remove the old filter cartridge (if replacing an existing one).
- Unpack the new filter cartridge and remove the protective packaging.
- Insert the new filter cartridge into the filter housing, ensuring it is properly seated.
- Secure the filter cap by turning it clockwise until it is snug.
7. Finalizing the Installation and Testing the Purifier
You’re almost there! To complete the installation and test the purifier:
- Connect the power cord to a grounded electrical outlet.
- Turn on the power switch on the purifier.
- Allow the purifier to run for a few minutes to flush out any air from the system.
- Check for any leaks or unusual noises.
- Collect a sample of purified water and test it using a water quality test kit to ensure the purifier is functioning properly.
Wrapping Up: Enjoying the Pure Benefits of Clean Water
Congratulations! You have successfully installed your Pureit water purifier. Now, you and your family can enjoy the peace of mind that comes with drinking clean, safe, and refreshing water. Remember to follow the recommended maintenance schedule provided in the purifier’s user manual to ensure optimal performance and longevity.
What People Want to Know
1. How often should I change the filter cartridge in my Pureit water purifier?
> The recommended filter change interval varies depending on the model and usage. Generally, it is recommended to replace the filter cartridge every 6-12 months or as indicated by the purifier’s indicator light.
2. Can I use my Pureit water purifier without electricity?
> No, the Pureit water purifier requires electricity to operate. It uses electricity to power the filtration process and the UV disinfection system.
3. What are the signs that my Pureit water purifier needs servicing?
> Look out for signs such as reduced water flow, strange noises, or a change in the taste or odor of the purified water. These may indicate the need for servicing or filter replacement.
4. How do I clean the exterior of my Pureit water purifier?
> To clean the exterior of your Pureit water purifier, use a soft cloth dampened with a mild detergent solution. Avoid using harsh chemicals or abrasive materials.
