What To Know
- Locate the legs and use an adjustable wrench to turn them clockwise to raise the range or counterclockwise to lower it.
- If the range is too high or too low, adjust the leveling legs until it is at the desired height.
- If the range is tipping forward or backward, it may be an indication of a faulty leveling leg.
Leveling your Whirlpool electric range is crucial for ensuring optimal performance and preventing potential hazards. This comprehensive guide will walk you through the step-by-step process of leveling your range, empowering you with the knowledge and skills to tackle this task with confidence.
Materials Required:
- Level
- Adjustable wrench
- Screwdriver
- Measuring tape (optional)
Safety Precautions:
- Disconnect the range from the power source before beginning any work.
- Allow the range to cool down completely before leveling.
- Wear gloves and safety glasses for protection.
Step-by-Step Instructions:
1. Determine the Levelness:
Place a level on the top of the range, both front-to-back and side-to-side. Check the level in multiple positions to ensure accuracy.
2. Adjust the Leveling Legs:
Most Whirlpool electric ranges have adjustable leveling legs at the bottom of the unit. Locate the legs and use an adjustable wrench to turn them clockwise to raise the range or counterclockwise to lower it.
3. Front-to-Back Leveling:
Adjust the front leveling legs until the range is level from front to back. Use the level to verify the levelness.
4. Side-to-Side Leveling:
Now, adjust the side leveling legs to level the range from side to side. Check the levelness using the level in multiple positions.
5. Re-Check the Levelness:
Once you have adjusted the leveling legs, re-check the levelness in both directions to ensure it is perfectly level.
6. Tighten the Leg Nuts:
Once the range is level, tighten the leg nuts using a screwdriver. This will secure the leveling legs in place.
7. Connect and Test:
Reconnect the range to the power source and turn it on. Check the stability of the range and ensure it is operating properly.
Troubleshooting:
1. Range is Unstable:
If the range is still unstable after leveling, check the floor for any unevenness or obstructions. Adjust the leveling legs accordingly.
2. Range is Too High or Too Low:
If the range is too high or too low, adjust the leveling legs until it is at the desired height.
3. Range is Tipping Forward or Backward:
If the range is tipping forward or backward, it may be an indication of a faulty leveling leg. Replace the faulty leg and re-level the range.
The Bottom Line:
Leveling your Whirlpool electric range is a straightforward task that can enhance its performance and safety. By following these detailed instructions, you can confidently level your range and enjoy years of trouble-free cooking.
Frequently Asked Questions:
1. How often should I level my Whirlpool electric range?
Leveling should be done periodically, especially after moving the range or if you notice any unevenness.
2. Can I use a laser level to level my range?
Yes, a laser level can be used for more precise leveling.
3. What are the consequences of not leveling my range?
An unlevel range can cause uneven cooking, overheating, and potential safety hazards.
4. Is it safe to use the range while it is not level?
No, it is not safe to use an unlevel range as it can pose a risk of tipping or malfunction.
5. Can I adjust the leveling legs without disconnecting the range?
It is not recommended to adjust the leveling legs while the range is connected to power.
