End Microwave Turntable Frustrations: DIY Guide to Frigidaire Motor Replacement
What To Know
- Replacing a broken turntable motor in your Frigidaire microwave is a relatively straightforward task that can be completed in under an hour.
- Use a socket wrench or nut driver to remove the nuts or bolts holding the motor in place.
- Replacing a Frigidaire microwave turntable motor is a simple repair that can be completed in a short amount of time.
Replacing a broken turntable motor in your Frigidaire microwave is a relatively straightforward task that can be completed in under an hour. This step-by-step guide will provide you with all the necessary instructions to get your microwave back up and running.
Tools and Materials
- Replacement turntable motor
- Phillips head screwdriver
- Socket wrench or nut driver
- Electrical tape
Safety Precautions
- Always unplug the microwave from the power outlet before performing any repairs.
- Allow the microwave to cool down completely before touching any internal components.
- Use caution when handling electrical wires and components.
Step-by-Step Instructions
1. Remove the Turntable
- Lift the turntable off the base of the microwave.
2. Disconnect the Wires
- Locate the wires connecting the turntable motor to the microwave.
- Carefully disconnect the wires by gently pulling them apart.
3. Remove the Motor
- Use a socket wrench or nut driver to remove the nuts or bolts holding the motor in place.
- Pull the motor straight up to detach it from the microwave.
4. Install the New Motor
- Align the new motor with the mounting holes.
- Insert the bolts or nuts and tighten them securely.
5. Reconnect the Wires
- Connect the wires to the new motor by pushing them together until they snap into place.
- Use electrical tape to secure the connections.
6. Test the Motor
- Plug the microwave back into the power outlet.
- Place the turntable on the base and press the “Start” button.
- The turntable should rotate smoothly.
7. Reassemble the Microwave
- If the motor is working properly, reassemble the microwave by placing the turntable back on the base.
Fixing Common Turntable Motor Issues
- Turntable not rotating: Check the wires for loose connections or damage. Replace the motor if necessary.
- Turntable rotating slowly: Clean the turntable base and rollers to remove any debris. If the problem persists, replace the motor.
- Turntable making noise: Lubricate the turntable base and rollers. If the noise persists, replace the motor.
Tips
- If you are not comfortable performing electrical repairs, it is recommended to contact a qualified appliance repair technician.
- Always use a replacement motor that is compatible with your specific microwave model.
- Clean the turntable base and rollers regularly to prevent future malfunctions.
Conclusion
Replacing a Frigidaire microwave turntable motor is a simple repair that can be completed in a short amount of time. By following the instructions outlined in this guide, you can save money and get your microwave back to working order.
FAQ
Q: Why is my microwave turntable not rotating?
A: Check the wires for loose connections or damage. Replace the motor if necessary.
Q: What is the average cost of a Frigidaire microwave turntable motor?
A: The cost can vary depending on the specific model, but typically ranges from $20 to $50.
Q: Can I use a different brand of turntable motor in my Frigidaire microwave?
A: No, it is important to use a replacement motor that is compatible with your specific microwave model.