What To Know
- Use a wire stripper to remove the insulation from the wires connected to the control board.
- Replacing the control board in an LG refrigerator is a relatively simple task that can be done in about an hour.
- The cost of replacing the control board in an LG refrigerator will vary depending on the model of the refrigerator and the cost of the replacement part.
Is your LG refrigerator acting up? If it’s not cooling properly, the control board may be to blame. Replacing the control board is a relatively simple task that can be done in about an hour. Here’s a step-by-step guide on how to replace the control board in your LG refrigerator:
1. Gather the Necessary Tools and Materials
Before you begin, make sure you have the following tools and materials:
- Replacement control board for your LG refrigerator model
- Screwdriver
- Pliers
- Wire stripper
- Electrical tape
- Safety glasses
- Gloves
2. Unplug the Refrigerator
For safety, always unplug the refrigerator before working on it.
3. Remove the Back Panel
The control board is located behind the back panel of the refrigerator. To remove the back panel, use a screwdriver to remove the screws that hold it in place.
4. Locate the Control Board
The control board is usually located at the top of the refrigerator, behind the back panel. It’s a rectangular circuit board with several wires connected to it.
5. Disconnect the Wires
Use a wire stripper to remove the insulation from the wires connected to the control board. Then, use a screwdriver to loosen the screws that hold the wires in place. Be careful not to lose any of the screws.
6. Remove the Old Control Board
Once the wires are disconnected, you can remove the old control board. Be careful not to damage the wires or the refrigerator itself.
7. Install the New Control Board
Place the new control board in the same spot as the old one. Use the screws you removed earlier to secure the new control board in place.
8. Reconnect the Wires
Reconnect the wires to the new control board. Make sure to connect the wires to the correct terminals.
9. Replace the Back Panel
Replace the back panel of the refrigerator. Use the screws you removed earlier to secure the back panel in place.
10. Plug in the Refrigerator
Plug the refrigerator back in and turn it on. The refrigerator should now be working properly.
11. Test the Refrigerator
Test the refrigerator to make sure it’s cooling properly. Place a thermometer in the refrigerator and set it to the desired temperature. After a few hours, check the thermometer to make sure the refrigerator is maintaining the correct temperature.
Troubleshooting: What to Do if the Refrigerator Is Still Not Working
If the refrigerator is still not working properly after replacing the control board, there may be another problem. Here are a few things you can check:
- Make sure the wires are properly connected to the control board.
- Check the fuse or circuit breaker for the refrigerator.
- Make sure the refrigerator is getting enough power.
- Call a qualified appliance repair technician for help.
Wrapping Up: A Functional LG Refrigerator Once Again
Replacing the control board in an LG refrigerator is a relatively simple task that can be done in about an hour. By following the steps in this guide, you can save yourself the cost of hiring an appliance repair technician.
Quick Answers to Your FAQs
Q: What are the signs that I need to replace the control board in my LG refrigerator?
A: Some signs that you may need to replace the control board in your LG refrigerator include:
- The refrigerator is not cooling properly.
- The refrigerator is making strange noises.
- The refrigerator is not responding to commands.
- The refrigerator is leaking water.
Q: How much does it cost to replace the control board in an LG refrigerator?
A: The cost of replacing the control board in an LG refrigerator will vary depending on the model of the refrigerator and the cost of the replacement part. However, you can expect to pay between $100 and $300 for the part and labor.
Q: Can I replace the control board in my LG refrigerator myself?
A: Yes, you can replace the control board in your LG refrigerator yourself if you are comfortable working with electrical appliances. However, if you are not comfortable working with electrical appliances, you should call a qualified appliance repair technician for help.
