What To Know
- Insert a paper clip or safety pin into the small hole at the bottom of the reservoir.
- A clogged needle in the brewing head prevents water from entering the K-Cup.
- It could be due to a cracked water reservoir, a faulty water pump, or a clogged needle.
Keurig coffee makers are beloved for their convenience and quick brewing capabilities. However, when the water stops flowing, it can be a frustrating experience. This comprehensive guide will delve into the reasons behind “Keurig coffee maker water not coming out” and provide step-by-step instructions to resolve the issue.
Clogged Water Filter
A clogged water filter is a common culprit. Replace the filter every 2-3 months to prevent mineral buildup and ensure optimal water flow.
Air Lock in the System
Air locks occur when air enters the water line, preventing water from flowing. To release the air lock:
1. Turn off the coffee maker.
2. Remove the water reservoir and fill it with cold water.
3. Insert a paper clip or safety pin into the small hole at the bottom of the reservoir.
4. Replace the reservoir and turn on the coffee maker.
Scale Buildup
Mineral deposits from tap water can accumulate inside the coffee maker, causing water flow issues. To descale:
1. Fill the reservoir with equal parts white vinegar and water.
2. Brew a cycle without a K-Cup.
3. Repeat with plain water to flush out the vinegar.
Faulty Water Pump
The water pump is responsible for circulating water through the system. If it fails, water will not be pumped into the brewing chamber. Contact Keurig customer support for replacement.
Clogged Needle
A clogged needle in the brewing head prevents water from entering the K-Cup. To clean it:
1. Remove the brewing head and locate the needle.
2. Use a paper clip or toothpick to gently unclog the needle.
3. Rinse the brewing head thoroughly.
Damaged Water Reservoir
A damaged water reservoir can leak or prevent water from flowing out. Inspect the reservoir for cracks or holes and replace it if necessary.
Other Possible Causes
- Empty water reservoir: Ensure the reservoir is filled with cold water.
- Incorrectly inserted K-Cup: Insert the K-Cup firmly and ensure it is centered.
- Overfilled K-Cup: Do not overfill the K-Cup, as this can block the water flow.
- Electrical issues: Check if the coffee maker is plugged in and receiving power.
Troubleshooting Tips
- Use cold water in the reservoir to prevent mineral buildup.
- Clean the coffee maker regularly to prevent scale accumulation.
- If the problem persists, contact Keurig customer support for assistance.
Information You Need to Know
Q1: Why is my Keurig coffee maker leaking water?
A1: It could be due to a cracked water reservoir, a faulty water pump, or a clogged needle.
Q2: How often should I clean my Keurig coffee maker?
A2: It’s recommended to descale your coffee maker every 3-6 months, depending on water hardness.
Q3: Can I use vinegar to clean my Keurig coffee maker?
A3: Yes, you can use a 50/50 vinegar and water solution to descale your coffee maker.
Q4: How do I reset my Keurig coffee maker?
A4: Unplug the coffee maker for 30 seconds, then plug it back in and press the power button.
Q5: What is the warranty on Keurig coffee makers?
A5: Most Keurig coffee makers come with a 1-year limited warranty.
