Nama Juicer Not Juicing? Don’t Panic! Here Are the Answers You Need

Nama juicers are renowned for their efficiency and ease of use. However, like any appliance, they can occasionally encounter issues that hinder their functionality. If your Nama juicer is not working as expected, here’s a comprehensive guide to help you identify and resolve the underlying problem.

Common Causes and Solutions

1. Power Issues

Problem: The juicer does not turn on or the motor is not running.

Solution:

• Ensure the juicer is properly plugged into a working outlet.
• Check if the power cord is damaged or frayed.
• Reset the circuit breaker or fuse associated with the outlet.

2. Overheating

Problem: The juicer stops working after a short period of use, or the motor becomes hot to the touch.

Solution:

• Allow the juicer to cool down for at least 30 minutes before attempting to use it again.
• Reduce the amount of produce being juiced at once.
• Clean the juicer thoroughly, especially the pulp screen and auger.

3. Clogged Pulp Screen

Problem: The juicer makes a grinding noise or struggles to extract juice.

Solution:

• Remove the pulp screen and clean it thoroughly with a soft brush or sponge.
• Ensure the pulp screen is properly aligned and securely attached.
• Cut produce into smaller pieces before juicing to reduce the strain on the screen.

4. Worn or Damaged Auger

Problem: The auger wobbles or makes excessive noise during operation.

Solution:

• Inspect the auger for any signs of damage or wear.
• If the auger is damaged, it may need to be replaced.
• Contact Nama customer support for assistance.

5. Leaking

Problem: Juice leaks from the base or around the lid.

Solution:

• Check the rubber gasket around the lid and replace it if damaged.
• Tighten the lid securely, ensuring it is properly aligned.
• Clean the juicer thoroughly, especially the pulp outlet and chute.

6. Jammed Produce

Problem: The produce gets stuck in the juicer and prevents it from operating.

Solution:

• Turn off the juicer and unplug it.
• Use a wooden spoon or tongs to gently remove the jammed produce.
• Cut produce into smaller pieces before juicing to prevent jamming.

7. Electronic Malfunction

Problem: The juicer’s display panel does not light up or responds erratically.

Solution:

• Reset the juicer by unplugging it and plugging it back in.
• If the issue persists, contact Nama customer support for further troubleshooting.

Key Points: Revive Your Nama Juicer

By following these troubleshooting steps, you can effectively resolve most common issues that may hinder the functionality of your Nama juicer. Regular maintenance and proper usage will ensure your juicer operates smoothly and delivers optimal juice extraction for years to come.

Top Questions Asked

1. Why does my Nama juicer make a loud noise?

• The juicer may be overloaded with produce. Reduce the amount of produce being juiced at once.
• The pulp screen may be clogged. Remove and clean the pulp screen thoroughly.
• The auger may be worn or damaged. Contact Nama customer support for assistance.

2. Why is my Nama juicer not extracting much juice?

• The pulp screen may be clogged. Clean the pulp screen thoroughly.
• The produce may be too soft or dry. Choose ripe, firm produce for optimal juice extraction.
• The juicer may be overheated. Allow the juicer to cool down before using it again.

3. Why does my Nama juicer leak juice?

• The rubber gasket around the lid may be damaged. Replace the gasket.
• The lid may not be properly aligned or tightened. Securely tighten the lid.
• The pulp outlet or chute may be clogged. Clean the juicer thoroughly.